The VISIMOP Monobloc 5455, in diameter 600 with 3 inputs - 1 output, made of polyethylene is an inspection or connection box. It is designed for free-flow networks, in PVC diameters 160 and 200 with possibility to drill entries in diameters 125, 160 and 200. Its resistance and ease of implementation allow it to meet site requirements, regardless of access difficulties. Optionally, the look can be equipped with accessories such as: - 400KN prefabricated concrete load distributor, ref. RCB 602-20. and RCB602-15 - Polyethylene adapter, height 100 mm, ref. AHV610. - JVH connection joint for entry quilting. - Rubber seal, diameter 630, ref. AD660-0630, for sealing between the sight glass and the load distributor.
Visimop II Ø600 monobloc 3 multi-diameter inputs for PVC Ø125 / 160/200 and 1 output 160/200
In accordance with issue 70 and developed in partnership with public works professionals and contractors, he presents: - A perfect seal. - Resistance to the water table (height 2 m) compared to the cunette. - A guarantee against corrosion. - An ease of implementation. - A hydraulic profile (slope at 2%). - No retention in materials. - A cunette with 5 connection possibilities.
From the ground plane you provided us, a tracking was done on each piece and on the ground plane. Check the connection diameter and the orientation of your pipes. Then proceed to the cutting of the chosen location with the hole saw adapted to the appropriate diameter. Place the corresponding branch gasket. Adjust the bottom of the excavation and then place the eye. Connect the inlet and outlet pipe. Set up the embankment by compacting in successive layers. Position the gasket between the manhole and the load balancer, if it is used. Place the load distributor with the cast iron or the polyethylene tear-off lid, as appropriate. In case of presence of water table, consult our Design Office.
Thanks to the high-density polyethylene quality, VISIMOP manholes do not require special maintenance.
Visimop is guaranteed for 15 years against corrosion.